Panasonic CF-C1 Series

183
Intel
®
Active Management Technology
E Select [Intel(R) ME General Settings] and press Enter .
F Select [Activate Network Access] and press
Enter .
G Press
Y on the [Caution] screen.
H Select [Previous Menu] and press
Enter .
I Select [Intel(R) AMT Configuration] and press
Enter .
J Press
Enter .
K Select [SOL/IDER] and press
Enter .
Change other settings as necessary.
L Select [SOL] and press Enter and then set to [ENABLED] and press
Enter .
M Select [IDER] and press Enter and then set to [ENABLED] and press
Enter .
N Select [Previous Menu] and press
Enter .
O Select [KVM Configuration] and press
Enter .
P Select [KVM Feature Selection] and press
Enter and set to [ENABLED].
Q Select [Previous Menu] and press
Enter .
R Select [Previous Menu] and press
Enter .
NOTE
 You can use the following characters to set Intel(R) ME Password.
• Minimum of 8 and maximum of 32 characters are used.
• 1 or more numeric characters are included.
• 1 or more special characters (example: “!” “$”) are included (only characters that can be displayed with the US
keyboard).
• Capital letters and small letters are mixed.
 When you are entering your password, the software recognizes the keyboard as a US keyboard. As a result,
depending on the keyboard you are using, different characters (unintended characters) may be entered for certain
keys.
The following table shows some examples.