25
Key Combinations
Fn
+
F3
Display switching ( page 98)
When an external display is connected you can change the operating mode. (The
change you made may not be effective until
Enter
is pressed.) You can also change
the operating mode by pressing +
P
.
Computer only Duplicate Extend Projector only
• After pressing +
P
, you can select the operating mode by using the left and
right cursor keys.
(When an external display is connected)
Internal LCD Simultaneous display External display
NOTE
When an external display is connected to an optional port replicator ( page
97), the display switching may work differently from the above. For further
information, refer to the Operating Instructions of the mini port replicator.
When an external display is connected, refer to the External Display ( page
98).
CAUTION
Do not press any keys until the display has finished switching.
Do not use this function:
• When an external display is not connected.
• When playing motion video such as DVD or MPEG.
• When using the Extended Desktop.
Until Windows startup is completed (during Setup Utility, etc.), the
simultaneous display cannot be used and pressing
Fn
+
F3
switches the
display between the internal LCD and the external display.
__
Key Functions Pop-up Icon
Windows 7
Windows XP
To Next Page
Loading...
Need help?
General
