53
Customizing the Power Setting
Fan control mode You can switch the rotation of the cooling fan to: Adjust according to the computer
temperature (Standard)/Reduce heat generation by faster rotation (High speed)/Reduce
the fan noise by slower rotation (Low speed).
NOTE
You can also switch according to the procedure of [Extension setting manual
temporary switching].
Screen-saver Switching the screen saver to Enable (Permitted)/Disable (Prohibited).
NOTE
When you set Screen Saver to (None) using the Windows function, this function
is disabled.
Wired LAN’s power while
sleeping
Switching the wired LAN Wake Up function to Use (On)/Not use (Off).
When set to [Off], the power consumption is reduced in Sleep/Hibernation.
When set to [Off], the wired LAN Wake Up function cannot be used because the
wired LAN is turned off in Sleep. Set to [On] to use the wired LAN Wake Up function.
NOTE
The setting becomes effective after restarting the computer.
Intel(R) video driver power
saving function
Switching the effectiveness of Intel (R) Display Power Saving Technology to Disabled/
Enabled 1: Low/Enabled 2/Enabled 3/Enabled 4/Enabled 5: High.
NOTE
When [Enabled] is set, the screen quality is kept to a certain degree by lowering
the display brightness or adjusting the contrast and colors.
Setting [Disabled] is recommended for work that requires subtle image and color
nuances or in video editing using video editing applications.
The setting becomes effective after restarting the computer.
Item Power saving contents
To Next Page
Loading...
Need help?
General
