Panasonic Firetracker FT128 - 6.3.1 User Level as specified in AS7240.2; 6.3.5 User Level 2 B; 6.3.6 User Level 3 A

Operation Manual
FT128 Rev 2.4
10
fault, strobes or OWS.
An open door is indicated in the LCD (i.e. an "open door" icon).
Site Specific Data (SSD)
The SSD is unique for each installation. All alarm points,
presentation numbers, user definable alarm texts,
programmable outputs, etc. are created in the PC program
EBLWin and also downloaded in FT1028 unit(s) with EBLWin.
Software (S/W) / Firmware / System
program
The software (S/W) – also called Firmware and System
program –
makes the control unit (the microprocessor) work. It
is factory downloaded but another / new version can be
downloaded in FT128 on site using the PC program EBLWin.
EBLWin
PC program used to create and download the SSD in FT128
unit(s). Also used to download another / new software version.
Can be used during commissioning / maintenance of the
FT128 system (auto address, check loop, acknowledge faults,
etc.)
Web-server
The Web-server is used to transfer FT128 information to other
systems e.g. Nurse call systems, as well as remote control via
a PC (browser) and an intranet / internet. The Web-server is
configured via the PC tool EBLWin.