Panasonic Firetracker FT128 - Software Versions; Table 14 Latest Software Versions for FT128

Operation Manual
FT128 Rev 2.4
81
13. New Site Specific Data (SSD)
56
can now be downloaded.
Note: After a new software download, the logon password reverts back to the default
setting i.e. “000000”. The user names and passwords will be changed when the SSD is
downloaded.
18.4 Software Versions
Due to continual development and improvement, different S/W versions can be found.
The S/W versions listed below in Table 14 were the valid S/W when this document was
written (the date of this document or date of revision).
Table 14 Latest Software Versions for FT128
S/W for:
Latest version
Required version
4556; EBL128 PCB 9285-6A Rev 6 or higher
2.4.4
2.4.4
4580; 8 zones expansion board, PCB no. 9287-2B
1.0.5
1.0.2
4580; 8 zones expansion board, PCB no. 9287-3A
2.0.4
2.0.4
4581; 8 relays expansion board
1.0.2
1.0.2
4582; I/O Matrix board
1.0.4
1.0.2
4583; Inputs and Outputs expansion board
1.0.2
1.0
1728; Ext. Presentation unit (EPU)
1.5.1
1.4.1
1735 / 1736; Alert Annunciation unit (AAU)
1.5.1
1.4.1
EBLWin
2.4.3
2.4.3
1588 Web-server
Cannot be used.
Cannot be used.
1598 Web-server II
2.4.3
2.4.3
Note: The EBLWin version and the EBL system software and web-server software
version must be the same, at least the first two digits; 2.4.x -- 2.4.x.
56
Old SSD can be opened in EBLWin, saved and then downloaded as new SSD.