Panasonic Firetracker FT128 - End Setup Wireless Detectors (H5;A9)

Operation Manual
FT128 Rev 2.4
118
24.9 End Setup Wireless Detectors (H5/A9)
This menu is used to set wireless base station in register / unregister / install mode back
to normal mode.
If there are no base stations in register / unregister / install mode, --- List is empty --- will
be shown. For more information, see Technical description of wireless detectors.
Action Text in display Comments
"Access"
Log on to FT128 as shown
in page 35.
Scroll to menu H5.
Service
ACCEPT? H5
"A" Calibration of supervised outputs
ACCEPT? A1
Scroll to menu A9.
End setup wireless detectors
ACCEPT? A9
"A"
Set base station 001 to normal mode
ACCEPT? L
L=A list in which you can
scroll. Press "A" to accept.
You will stay in this list
until all base stations are
in normal mode or press
"Return" to menu A9.
"A" (to re-enable) or
"Return"
End setup wireless detectors
ACCEPT? A9
"Return"
Service
ACCEPT? H5
Scroll or press "Return"