Operation Manual
FT128 Rev 2.4
40
6.4 Passwords / Change of Password
Normally, the user names and passwords are downloaded / changed via EBLWin (menu
system I User data) i.e. SSD download.
A logged-on person (user name) can change his password via menu H10. If “Safe
shutdown of control unit” (menu H8/S7) is done following the password change, this
password will be valid also after power down else not.
A password changed via menu H10 (+ H8/S7) will be valid until it is changed via menu
H10 again or it is erased via EBLWin (menu Tools I Reset user passwords).
6.4.1 Password for Web-server access only
Normally a password consists of 6 digits, this allows the same user to get access to the
control unit as well as to the Web-server if both are selected.
If a user should have access to the Web-server only, it is possible to choose a stronger
password. It consists of 6 to 10 characters and digits as well as letters and alphanumeric
characters. Note that the letters are case sensitive.
To Next Page
Loading...
