3.5 Operational Mode
3-16 Maintenance Console Guide
System Programming can be done either in Interacrive or Batch mode.
Interactive programming can be done either at On-site or by Remote.
Interactive programming mode(Conversational interface)
Two-way communications between the KX-TD500 and a PC are taking place in real
time. This provides the PC user with direct, immediate responses from the KX-TD500
system.
Batch Processing mode(Noninteractive)
In batch precessing, all the data to be input is collected together before being
processed together as a batch data.
Batch programming can be done by PC alone. No connection with the KX-TD500
System is required. The KX-TD500 System receives a batch transmission (upload)
and has no need to respond to it.
To Next Page
Loading...
