System Programming 4-61
4.4.1 Trunk Line
Used to assign various parameters for trunk lines.
Parameter Description/Function Reference
Trunk Port
Assignment
Sec. 4.1.2
Display, Call
Information
(F/G)
Specifies the physical number of the trunk card and its
type, which you are going to program.
Specifies the trunk port number which you are going to
program.
Displays the Trunk Group number to which the trunk
line is assigned.
[Note]
• Each trunk line is assigned to a Trunk Group by
“Trunk Port Assignment” programming. (see Section 4.1.2)
Specifies the name for the trunk line.
[Note]
• This is shown on a display PT when making or
receiving a call using this trunk.
XXX : YYY
XXX : Card No.
(101-314)
YYY : Card Type
1 - n
n = 4 (DID)
24 (T1)
30 (E1)
8
(Others)
1 - 48
(Display only)
Up to 10
alphanumeric
characters
(TXXXXX
)
physical number
Card No.
Port No.
Group No.
Name
Value Range
(default)
To Next Page
Loading...
