Panasonic KX-TD500 - Trunk Port Assignment

System Programming 4-13
4.1.2 Trunk Port Assignment
Used to assign each trunk port in the system to one of up to 48 trunk groups.
Parameter
Value Range
(default)
Description/Function Reference
None
Trunk Group
Sec. 4.3.1
Trunk Group
(F/G)
None
XXX : YYY
XXX : Card No.
(101-314)
YYY : Card Type
1 - 48
(DID card :47)
(Others : 1)
1. OUS
2. INS
3. FAULT
Card No.
Group No.
Status
Specifies the physical number of the trunk card and its
type, which you are going to program.
Specifies the trunk group number (1 - 48) to which the
trunk port is assigned.
[Note]
• Each trunk port must be assigned to a Trunk Group.
This program defines the Trunk Group assignment for
each trunk port.
Specifies the operating status of the trunk port.
1. INS: The trunk port is In-Service.
2. OUS: The trunk port is Out-of-Service.
3. FAULT: The trunk port is defective.