4-86 System Programming
4.5.10 Voice Mail Integration
4.5.10.1 Voice Mail Integration 1/2
Used to assign Integration Code and Voice Mail Command for Voice Mail Integration.
Integration Code
When DTMF tone Integration is activated, the KX-TD500 informs the VPS (Voice Processing
System) of the state of the call (busy, answered, ringing, etc.) by sending a code with DTMF
tone before sending the normal call progress tone (busy tone, ringback tone, etc.).
These codes enable the VPS to immediately recognize the current state of the call and
improve its call handling performance.
Voice Mail Command
Voice Mail Commands are used to control the activity of VPS.
There are the following four Voice Mail Commands:
Leave Message, Get Message, AA (Automated Attendant) Service and VM(Voice Mail) Service.
A unique code (dialing digits), up to 16 digits long, can be assigned to each command.
To Next Page
Loading...
