Panasonic KX-TD500 - [DTMF-G;R Test]

Utility 5-9
5.2.1 Card/Port Test (On-line diagnosis)
[DTMF-G/R Test]
6. Click DTMF-G/R Test .
• “Generator/Receiver Test” screen is displayed.
7. Click Execute .
• After executing the test, the test result is displayed.
Example: When a T1 card is installed in the Slot No. 101.
Description
Error Indication Table
Item
Card
Result
Error Indication
Display/Input Value
Card No. : Type
OK
NG
See “Error Indication
Table.”
Description
The card number and the type of the target card
to be diagnosed. (The card specified in “Card
Information” screen is displayed automatically.)
The results of diagnosis.
The details of an error.
Displayed only when Result is NG (no good).
Error Message
PB Generator XX failure
PB Receiver XX failure
Description
PB Generator is not functioning properly.
XX:PB Generator No.
PB Receiver is not functioning properly.
XX:PB Receiver No.