System Programming 4-65
4.4.2 Extension Line
Used to assign parameters for extension lines.
Parameter
Value Range
(default)
Description/Function Reference
Specifies the physical number of the extension card and
its type, which you are going to program.
Specifies the extension port number which you are
going to program.
Displays the Extension Group number to which the
selected extension port is assigned.
Displays the extension number of the extension port.
Used to select the extension port desired.
Specifies the name for the extension line.
[Note]
• This is shown on a display PT when an extension call
is coming in on it.
XXX : YYY
XXX : Card No.
(101-314)
YYY : Card Type
1 - 8 or 16
(1)
1 - 128
(1)
(Display only)
3 - 4 digits
consisting of 0-9
Up to 10
alphanumeric
characters
(Blank)
Card No.
Port No.
Group No.
DN
Name
To Next Page
Loading...
