Panasonic KX-TD500 - Card;Port Test (On-Line Diagnosis)

5-6 Utility
5.2.1 Card/Port Test (On-line diagnosis)
3. Click INS Status button of the target card.
(Example: When a T1 card is installed in the Slot No.1 of the Basic Shelf)
• The message “Change the card (101:T1) status?” is displayed.
4. Click OK .
• Confirm that the Status button of the target card is changed to “OUS.”
5. Click the Card button of the target card.
• “Card / Port Test Menu” screen is displayed.
• If the card you selected is in INS status, the
message “Status Error (the card status is not
“OUS”)” is displayed.
[Note]
• Test items which applie to the card vary depending on the card type.
Dim-displayed test items are not available for the selected card type.