System Programming 4-77
4.5.1 System Speed Dialing
Used to program a list of up to 1000(000-999) frequently dialed numbers per tenant.
Anyone in the same tenant can dial these numbers.
Up to 2000 Speed Dialing codes can be shared among each tenant under the condition of up to
1000 codes per tenant.
Parameter
Value Range
(default)
Description/Function Reference
Specifies the tenant number to which the System Speed
Dialing codes are assigned.
(Required when “Tenant Service” is employed.)
Specifies the entry number of Speed Dialing codes
which you are going to program.
Displays the maximum number of Speed Dialing codes
allocated to a tenant.
Displays the total number of Speed Dialing codes which
are already programmed.
Specifies the name for each speed dial code.
[Note]
• The stored name is shown on a large display PT, such
as KX-T7235, when dialing System Speed Dialing
number.
Specifies the telephone number for each speed dial
code.
1-8
(1)
000-999
in 20 codes
increments
(000 - 019)
0 - 1000
(Display only)
0 - 1000
(0)
(Display only)
Up to 10
alphanumeric
characters
(Blank)
Up to 24 digits
consisting of 0-9,
. #. -. P, S and F
(Blank)
Tenant No.
Entry No.
Max. Entry
Current
Registration
Name
Number
To Next Page
Loading...
