Panasonic KX-TD500 - Local Hunt Sequence

System Programming 4-39
4.2.5 Local Hunt Sequence
Specifies the trunk group number in hunting order.
[Notes]
• Local Hunt Sequence works only if ARS (Automatic
Route Selection) mode is turned off.
• The sequence can be used by any extension user in
the system regardless of the tenant but trunk groups
will be skipped if they do not belong to the same
tenant as the extension user.
Specifies the trunk group hunt sequence to be used when an extension user attempts to make an
outside call by dialing the feature number for “Local CO Line Access / ARS” or by pressing a
Loop-CO key.
Parameter
Value Range
(default)
Description/Function Reference
1-48
(01:1)
(Others:Blank)
Trunk Group No.
Hunting Order (1-48)