System Programming 4-85
4.5.9 DISA/TIE User Code
4 - 10 digits
consisting of 0-9
“0 through 9”
(Blank)
1 - 96
(1)
Used to program a list of up to 32 DISA/TIE User Codes.
Each code is appended with a unique COS level.
Parameter
Value Range
(default)
Description/Function Reference
Specifies the User Codes for DISA / TIE feature.
[Note]
• DISA user code is required when the DISA caller
attempts to make an outside call (Trunk Security
mode) or to make both extension and outside calls(All
Security mode).
• If “TIE-CO Security” mode (See Section 4.4.1 Line-
Trunk Line) is set to “Yes,” entering TIE user code is
required when the TIE caller attempts to make a CO
call.
Specifies COS (Class of Service) Level for each User
Code.
Code
COS
To Next Page
Loading...
