Panasonic KX-TD500 - Caller ID Card (KX-TD193)

2.7.2 Caller ID Card (KX-TD193)
2-58 Installation
• This card is installed on the ELCOT card.
1) Connection to the ELCOT card (KX-TD50180)
1.
Insert the connector (plug) on the Caller ID card into the connector (jack) on the ELCOT card.
2. Install the ELCOT card into a free slot. See Section 2.5.3 “ELCOT Card (KX-TD50180).”
[Note]
• Four CO lines are available for the Caller ID function with one Caller ID card.
connector
( 8-pin )
connector
( 22-pin )
Caller ID Card
Connected to
ELCOT ports 5-8.
Connected to
ELCOT ports 1-4.
Caller ID Card Caller ID Card
ELCOT Card
8-pin connector
( plug )
8-pin connector
( jack )
22-pin connector
( jack )
22-pin connector
( plug )