Panasonic KX-TD500 - TSW Conference Expansion Card (KX-TD50104)

2.7.4 TSW Conference Expansion Card (KX-TD50104)
2-60 Installation
• This card is installed on the T-SW card.
1) Connection to the TSW card
1.
Insert the 30-pin connector (plug) on the TSW CONF card into the 30-pin connector (jack)
on the TSW card.
2. Install the TSW card into the Basic Slot 2 (BS2). See Section 2.3.2 “TSW Card.”
KX-TD50104CONF
Connector
“CONF” is marked.
KX-TD50104 CONF
TSW Conference Card
50-pin connector
56-pin connector
(Plug)
Make sure the card is
in the correct direction
50-pin connector
56-pin connector
(Jack)
TSW Card