Panasonic KX-TD500 - Peripheral Equipment; Battery Adaptor (KX-A46)

2.8 Peripheral Equipment
2-62 Installation
2.8.1 Battery Adaptor (KX-A46)
1. Connection of KX-A46
2. Connect the batteries to the KX-A46.
Connect the Battery Adaptor with two auto-
mobile-type batteries (12V DC
u 2) using
Battery Adaptor Line Cable as shown.
Make sure of the polarities of batteries and
wires.
Make sure you do not short the batteries and
wires.
To connect the two batteries, use an accesso-
ry wire.
3. Connecting to KX-TD500.
Plug the Battery Adaptor cord to Backup
Battery connector on the Basic Shelf.
POWER
ON 1
FUSE
OFF
DIGITAL SUPER HYBRID SYSTEM
RUN
OFF LINE
ALARM
+
-
+
-
POWER
ON
FUSE
OFF
Backup Battery
Connector
Power Unit
Battery
Adaptor
Car batteries
Fuse Holder
Accessory
Wire
Red(+) Yellow(-)
Blue(-)
12VDC
12VDC
A46