Panasonic KX-TD500 - ELCOT Card (KX-TD50180)

2.5.3 ELCOT Card (KX-TD50180)
2-44 Installation
• Insert this card into a free slot.
1) Connection of the Central Office Line cord (twisted cable)
• Insert the 50-pin connector (plug) of the Central Office Line cord (twisted cable) into the 50-
pin connector (jack) on the ELCOT card. See Section 2.1.4 “Amphenol 57JE type connector.”
2) Connection of cable pins
See Section 2.5.7 “Cable Pin Numbers for CO Lines.”
3) Auxiliary connection
See Section 2.9 “Auxiliary Connection for Power Failure Transfer.”
KX-TD50180
PUSH
ELCOT
ELCOT
POWER
ON 1
FUSE
OFF
DIG
ITAL SUPER HYBRID SYSTEM
RUN
O
FF LINE ALARM
25
50
1
26
Connector type
50 pin (Amphenol 57JE
series or the equivalent)
To Terminal Board
from the Central
Office (CO)
“ELCOT” is marked.