Panasonic KX-TD500 - [Card Test]

Utility 5-7
5.2.1 Card/Port Test (On-line diagnosis)
[Card Test]
6. Click Card Test .
• “Card Test” screen is displayed.
7. Click Execute .
• After executing the test, the test result is displayed.
Example: When a T1 card is installed in the Slot No. 101.
Description
Error Indication Table
Item
Card
Result
Error Indication
Display
Card No. : Type
OK
NG
See “Error Indication
Table.”
Description
The card number and the type of the target card
to be diagnosed. (The card specified in “Card
Information” screen is displayed automatically.)
The results of diagnosis.
The details of an error.
Displayed only when Result is NG (no good).
Error Message
Card link error
Card type error
ROM error
RAM error
MODEM failure
OPX Power failure
Bell power failure
OGM ROM error
OGM RAM error
OGM Rec/Play
failure
Description
Data link between the selected card and the CPU
card is abnormal.
Card assignment does not match the card type
installed in the system.
Card ROM is not functioning properly.
Card RAM is not functioning properly.
MODEM is not functioning properly.
OPX External Power Unit is not functioning properly.
OPX Bell Power is not functioning properly.
OGM controlling ROM on the DISA card is not
functioning properly.
OGM controlling RAM on the DISA card is not
functioning properly.
OGM Recording and Playing back are not
functioning properly.
Card Applied
RMT/ERMT
OPX
OPX
DISA
DISA
DISA