System Programming 4-81
4.5.5 Account Code
Used to program a list of up to 1000 account codes which are used to identify incoming and
outgoing outside calls for accounting and billing purposes.
Parameter
Value Range
(default)
Description/Function Reference
Specifies the tenant number to which a list of Account
Codes is assigned.
(Required when “Tenant Service” is employed.)
Specifies the entry number of Account codes which you
are going to program.
Specifies up to 10 digits account codes.
Specifies the TRS (toll restriction) level for each
account code.
[
Note]
• TRS level appended to each account code applies to
the call in conjunction with “Toll Restriction by
Account Code Entry” feature.
1 - 8
(1)
0001-1000
in 20 codes
increments
(0001 - 0020)
Up to 10 digits
consisting of 0-9
(Blank)
1 - 8
(Blank)
Tenant No.
Entry No.
Code
TRS Level
To Next Page
Loading...
