4-94 System Programming
4.5.13 UCD Time Table
If all extensions in a UCD group are busy, the incoming outside calls will be handled by the
UCD Time Table procedure.
Up to 32 UCD Time Tables, max.16 steps for each, can be assigned.
Parameter
Value Range
(default)
Description/Function Reference
1-32
(1)
S(1 - 8)
1T - 4T
TR
RET
OFF
(None)
Table No.
Command
Sequence
Specifies the UCD Time Table number which you are
going to program.
The following commands are provided to make up a
UCD Time Table procedure.
<Commands list and their functions>
S (1-8):
OGM (1-8) is sent to the caller if available. If not, wait
until OGM (1-8) becomes available.
1T - 4T:
Callers are put in the waiting queue for N (1-4) x 16
seconds while hearing the ringback tone or music on hold
.
TR:
Transfers a call to the Overflow destination.
RET:
Returns to the first step of the sequence.
OFF:
Disconnects the call compulsorily.
To Next Page
Loading...
