Panasonic KX-TD500 - Fixing on the Floor

2.2.5 Fixing on the Floor
2-24 Installation
Setting Out and Drilling
Location of the anchorplug (A):
1.
Drill the hole for the anchor plug on the floor in accordance with
the measurements.
2. Drive the anchor plug into the hole.
Note: When fixing the KX-TD500 System to the floor, anchor plugs should
always be used to prevent the system from falling over.
316 mm
(A) 262 mm
52 mm
334 mm
33 mm
54 mm54 mm
288 mm
29 mm
Anchor plug
Hammer
Hole
6.4 mm
35 mm
430 mm (Basic system)
730 mm (2-Shelf system)
1030 mm(3-Shelf system)
*
1
With CPU and T-SWcards
*
2
Without cards
Shelf
Basic Shelf*
1
Expansion Shelf*
2
Weight
20.4 kg
12.6 kg