4-50 System Programming
4.3.1 Trunk Group
Used to assign parameters for each trunk group.
Parameter
Value Range
(default)
Description/Function Reference
None
Tenant
Sec. 4.2.1
Intercept
Routing
(F/G)
Specifies the trunk group number which you are going
to program.
Specifies a tenant number (1-8) to which the trunk
group is assigned.
(This setting is required when “Tenant Service” is employed.)
Specifies the destination extension number (3 or 4
digits) for Intercept Routing feature in both Day and
Night modes respectively.
[Note]
• Intercept Routing provides an automatic re-direction
of calls that have not been answered.
1-48
(1)
1 - 8
(1)
3-4 digits
consisting of 0-9
(Blank)
Group No.
Tenant
Intercept
Destination
Day
Night
To Next Page
Loading...
