Panasonic KX-TD500 - Digital Trunk Card (KX-T96188)

2.5.2 E-1 Digital Trunk Card (KX-T96188)
Installation 2-43
• Insert this card into a free slot 01, 05 or 09.
• A maximum of six KX-T96188 cards can
be installed in the system
CAUTION:
E-1 ports are SELV ports and should only be
connected to SELV services.
Connecting coaxial cables to E-1 card
Insert the coaxial plug of the telephone line
cords (2 coaxial cables) into the coaxial
jack (E-1 port on the KX-T96188).
KX-T96188
PUSH
E-1
Receive
lead
Under 10m
E-1 Port
E-1 Digital Trunk card
(KX-T96188)
Send
lead
Coaxial Connectors from the
Central Office (CO)
Connecting central office line and E-1 card
KX-T96188 ↔ Network Terminal (CO)
Connecting E-1 card and E-1 card
KX-T96188 ↔ KX-T96188
Transmit
lead
Receive
lead
Network Terminal (CO)
Receive
lead
8 Pin Modular jack
on KX-T96188
8 Pin Modular jack
on KX-T96188
Transmit
lead
Receive
lead
Transmit
lead
Receive
lead
)
Transmit
lead
)
→
←
←
→
←
←→
→
“E-1” is marked.