Panasonic KX-TD500 - Pay Tone Card (KX-TD50189)

Installation 2-59
• This card is installed on the ELCOT card.
1) Connection to the ELCOT card (KX-TD50180)
1.
Insert the connector (plug) on the Pay Tone card into the connector (jack) on the ELCOT card.
2. Move the pin jack on the CN11s toward OP direction.
3. Install the ELCOT card into a free slot. See Section 2.5.3 “ELCOT Card (KX-TD50180).”
[Note]
• Four CO lines are available for the Pay Tone function with one Pay Tone card.
connector
( 8-pin )
connector
( 22-pin )
Pay Tone Card
connector
( 4-pin )
Connected to
ELCOT ports 5-8.
Connected to
ELCOT ports 1-4.
Pay Tone Card Pay Tone Card
ELCOT Card
4-pin connector
( plug )
8-pin connector
( plug )
4-pin connector
( jack )
22-pin connector
( jack )
22-pin connector
( plug )
8-pin connector
( jack )
OP
OP
CN11
2.7.3 Pay Tone Card (KX-TD50189)