System Programming 4-53
4.3.2 Extension Group
Used to assign various parameters for up to 128 (1-128) Extension Groups.
Parameter
Value Range
(default)
Description/Function Reference
None
Extension
Group
(F/G)
Specifies the Extension Group number which you are
going to program.
Specifies the FDN (Floating Directory Number) for
the Extension Group.
Specifies the Group Type for each Extension Group.
This determines how the Extension Group handles the
incoming calls directed to it.
1. None: No Group Type is specified.
2. Terminate: Functions as a Station Hunting Group
(Terminate).
3. Circular: Functions as a Station Hunting Group
(Circular).
4. Ring: Functions as a Ring Group.
5. Operator: Functions as an Operator Group.
6. VM: Functions as a VM (Voice Mail) Group.
7. AA: Functions as an AA (Automated
Attendant) Group.
8. UCD: Functions as a UCD (Uniform Call
Distribution) Group.
1-128
(1), (128)
3 - 4 digits
consisting of 0-9
(Blank)
1. None
2. Terminate
3. Circular
4. Ring
5. Operator
6. VM
7. AA
8. UCD
(
Group
no.128:Operator)
(Others:None)
Group No.
FDN
Group Type
To Next Page
Loading...
