Panasonic KX-TD500 - Page 181

4-42 System Programming
4.2.7 System Option
5
6
7
8
9
10
Limited call
duration
Transfer
recall
destination
Checking
dial ,# by
toll restriction
Confirmation
tone for
Override,
Barge-in and
Conference
Confirmation
tone for Call
Pickup,
Paging-
Answer,
TAFAS-
Answer, Hold
Retrieve and
Call Park
Retrieve
Station Speed
Dialing Initial
Display
1. Outgoing
calls only
2. Both calls
(1)
1.
Originating
extension
2. Operator
(1)
1. No check
2. Check
(2)
1. Enable
2. Disable
(1)
1. Enable
2. Disable
(1)
1. Name
2. Number
(1)
Specifies the type of calls which are restricted by
“Limited Call Duration” setting.
[Note]
• This setting applies to the extension on which “Time
Limit of Outside Calls” is enabled by COS programming.
Specifies whether Transfer Recall occurs at the transfer
originating extension or at Operator Group extensions,
if the call (both inside and outside) transferred to an
extension is not answered within a specified period of
time.
Specifies whether or not the system checks the user-
dialed “ ” and “#” during Toll Restriction procedure.
[Note]
• This assignment is required for certain Central Offices
(CO) to prevent toll fraud.
Some Central Office ignores the user-dialed “ ” and
“#”. If your CO is such a type, select “No check.”
Allows you to remove confirmation tone 4.
This tone is sent when a three-party conference is
established/finished.
Allows you to remove Confirmation Tone 3.
This tone is sent when a conversation is established just
after an extension user dials the feature number for
accessing the following features: Call Pickup, Paging,
Paging Answer, TAFAS Answer, Hold Retrieve and
Call Park Retrieve.
Specifies the Initial display of a large display DPT,
such as KX-T7235, in Station Speed Dialing.
Limited Call
Duration
(F/G)
Call Transfer
Unscreened-
to Station
(F/G)
Toll
Restriction
(F/G)
Confirmation
Tone
(F/G)
Confirmation
Tone
(F/G)
(U/M) p.
Parameter
Value Range
(default)
Description/Function Reference