Panasonic KX-TD500 - Page 183

4-44 System Programming
4.2.7 System Option
Parameter
Value Range
(default)
Description/Function Reference
DISA
(F/G)
DID
(F/G)
Tie Lines
(F/G)
Specifies whether or not the system notifies the
extension user by sending a special dial tone when the
following features are assigned on their extension.
Specifies the call duration count start mode.
Specifies the treatment of DISA callers when the
extension they dialed are busy.
Specifies the treatment of DID/DDI callers when the
extension they dialed are busy.
Specifies the treatment of TIE callers when the
extension they dialed are busy.
Enables or disables “Off-hook Monitor” feature on a
system-wide basis.
[Note]
• This setting applies to the KX-T7400 series PTs only.
1. Enable
2. Disable
(1)
1. Answer or
Time-out
2. Answer
(1)
1. Send busy
tone
2. Transferred
to IRNA
destination
(1)
1. Send busy
tone
2. Transferred
to IRNA
destination
(1)
1. Send busy
tone
2. Transferred
to IRNA
destination
(1)
1. Enable
2. Disable
(2)
Special dial
tone after
setting feature
Duration
starting mode
Destination
Busy - DISA
Destination
Busy - DID
Destination
Busy - TIE
Off-hook
Monitor
15
16
17
18
19
20