System Programming 4-67
4.4.2 Extension Line
Parameter
Value Range
(default)
Description/Function Reference
Specifies the line to which the extension is connected
when it goes off-hook to answer a call.
Specifies the CO button number to which the extension
is connected when it goes off-hook to answer a call.
This assignment is required when “Prime Line - CO” is
specified in “Preferred Line - Incoming” programming.
Specifies whether or not the extension can use the LCS
(Live Call Screening) feature.
Assigns whether the voice message being recorded is
monitored automatically through the built-in speaker
(Hands-free mode) or an alert tone is sent (Private
mode) while incoming callers are leaving message in
the mailbox of the extension.
Enables or disables the LCS Continuous Mode.
Specifies the 3-digit password for LCS Playback.
Enables or disables Call Log Overwrite Mode.
If the Call Log is full (30 call records are already
logged) when a new caller ID call comes in :
1. Yes : a new call record overwrites the oldest one in
the Call Log
2. No : a new call record is not logged
Specifies the Call Log Lock Password.
The extension user can lock the call log display so that
incoming call information is not shown on the display.
[Note]
• The Manager or an Operator can cancel the Call Log
Lock in case the extension user forgets the lock code.
1. No Line
2.
Ringing Line
3. Prime Line
- ICM/PDN
4.
Prime Line - CO
(Ringing Line)
1 - 24
(Blank)
1. Inactive
2. Active
(Inactive)
1. Private
2. Handsfree
(Handsfree)
1. Enable
2. Disable
(Enable)
Fixed to 3 digits
consisting of 0-9
(None)
1. Yes
2. No
(Yes)
Fixed to 3 digits
consisting of 0-9
(Blank)
Preferred Line
Incoming
Key No.
LCS
Status
Operation
Mode
Continuous
Mode
Playback
Password
Call Log
Overwrite
Mode
Lock Password
To Next Page
Loading...
