4-100 System Programming
4.7.2 Leading Digit Table4.7.2 Leading Digit Table
Used to determine the appropriate Route Plan Table number for a call by analyzing the extension
user-dialed number. Up to 800 Leading Digit table numbers can be programmed in the system.
Parameter
Value Range
(default)
Description/Function Reference
Specifies the Leading Digit Table number which you
are going to program.
Specifies the leading 10-digit of the telephone numbers
which will be routed by ARS procedure.
[Note]
• “X” can be used as a wild card character which
substitues any digits in its position
Specifies the Route Plan Table No. ( 01 - 48) which is
used for routing the telephone number registered in Dial
field above.
001 - 800
in 20 entries
increments
(001-020)
Up to 10 digits
consisting of 0-9,
, # and X.
(Blank)
01 - 48
(1)
Entry No.
Dial
Route Plan Table
To Next Page
Loading...
