2.2.3 Expansion to 3-Shelf System
2-18 Installation
Stacking on the 2-Shelf System
1. To connect the expansion shelf 2 with 2-Shelf System, place the
holes of the expansion shelf 2 exactly on the holes of the
expansion shelf 1.
Note: Remove the plastic cover on the back cover of the Expansion Shelf 2.
Refer to “Removing Parts on the Top Cover and Back Cover” on page
2-19.
2. When the holes are placed properly, fix them with the three
screws immediately to prevent the expansion shelf 2 from
falling down.
To Next Page
Loading...
