Panasonic KX-TD500 - Page 91

2.7.1 DPH Card (KX-T96161)
Installation 2-55
2) Installation of the Doorphone (KX-T30865)
1.
Loosen the screw to separate the door-
phone into two halves.
2. Install the base cover to the wall with two
screws.
• Two kinds of screws are included.
Please choose one according to your
wall type. See the following.
3. Connect the wires from the terminal box
to the screws located in the front cover.
4. Secure both halves together and re-install
the screw.
...........When the doorphone plate has been
fixed to the wall.
...........When you wish to install the
doorphone directly to the wall.
Panasonic
screw
To the terminal box
(See the next page.)