Panasonic KX-TD816 - Page 109

A
3
Features
Example: Program Address [3 131 AR.5 Time Table
f- Enter the starting time of
each zone. If a zone is
not necessary. select
“Disable.”
Table 3
Step.4. Determine the priority of the CO line groups in each time zone.
The table below shows the carrier and CO line groups selected for each
priority and time zone:
Least Costly Carrier /
CO Line Group (Priority I )
Carrier F/Group 2
Carrier F/Group 2 Canier.E/Group 1
Next Less Costly Carrier /
CO Line Group (Priority 2)
Most Costly Carrier /
CO Line Group (Priority 3)
Carrier E/Group 1
Carrier G/Group 3 Carrier F/Group 7
Carrier G/Group 3 Carrier E/Group 1
Carrier G/Group 3
Table 4
To have the system use the priorities shown above, use one of the
programs [322] through [329] “ARS Routing Plans 1 through 8” (Route
Plan Tables 1 through 81.
As we have already selected Leading Digit Table 1, select Route Plan
Table 1. Enter the CO line group numbers in priority order. If the
specified CO line group requires digit modification, designate a digit
modification table number from 1 through 8.
This table is required to have the system automatically add a specific
carrier access code to the user-dialed number.
Example: Program [322] Route Plan Table 1
\ / Time -A ( Time -B ( Time.:C / Time -l?. /
COG Modify COG Modify COG Modify COG Modify
Priority
1 2 2
2. 2
1 1
Priority
2 1 1
3 3
2 2
Priority
3 3 3
1 1
3 ‘3
Table 5
COG: CO Line Group
Modify: Modification Table Number
3-8
Features