Panasonic KX-TD816 - Account Code Entry Mode

.-
47
0
COS Programming
508
Account Code Entry Mode
Description
There are three account code modes: Option, Verified-All Calls and
Verified-Toll Restriction Override. This program determines the
mode to be used by each Class of Service (COS).
Option mode:
The user can enter any account code, if needed.
Verified - All Calls mode:
The user must always enter a pre-assigned account code to make a
co call.
Verified - Toll Restriction Override mode:
The user must enter a pre-assigned account code when the user
needs to override toll restriction.
Selection
l COS number: 1 through 8, * ( * =a11 COS)
l Option / Verify - All (Verified-All Calls) / Verify - Toll
(Verified-Toll Restriction Override)
Default
All COS - Option
Programming
1.
2.
3.
Conditions
4.
5.
6.
7.
8.
Enter 508.
Display: Cal,l Accounting
Press NEXT.
Display: COS NO?->
Enter a COS number.
To enterCOS number 1,you can alsopress NEXT.
Display example: COS1:Option
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
Repeat steps 4 through 6.
Press END.
l To assign all COS to one selection, press the * key at step 3. In this
case, the display shows the contents programmed for COS 1.
l Program [ 1051 “Account Codes” is used to define the Account Codes
for the Verified modes.
l Program [601] “Class of Service” is used to assign a Class of Service to
each extension.
Feature References
Section 3, Features,
Account Code Entry
Toll Restriction Override by Account Code Entry
System
Programming
4-103