2.3.3 Extension Connection
for Proprietary Telephones, Single Line Telephones and DSS Consoles
(Ijx-TDS16: Jack 1 through Jack 8, KX-TD1232: Jack 1 through Jack 16)
There are two methods to perform Extension Connection, using a
modular connector and an Amphenol Connector. Which method
should be used depends on the model number of the system as
shown below.
Model number Connector to be used
Kx-TD8 16
Modular Connector
KX-TD1232
Amuhenol Connector
Maximum cabling
distance of the extension line cord (twisted cable)
The maximum length of the extension line cord (twisted cable) that
rnnnertc the main llnit anA the evtencinn ic chnum hplnxrr-
““IALI”“LO UIY lllLull UlllL CUIU UI” “AC”llOl”ll ID i)l‘” I” II VbI”
** .
26 AWG; Under 140 m (460 feet)
Proprietary Telephone
Single Line Telephone
26 AWG; Under 698 m (2290 feet)
24 AWG; Under 229 m (750 feet)
22 AWG; Under 360 m ( 1180 feet)
i
DSS Console
” (KX-T7240,
KX-T7040)
Notes
The
KX-TD 1232 is illustrated as a main unit.
Installation
2-15
To Next Page
Loading...
