H
3
Features
.
Programming
References
l
A single press of a One-Touch Button. DSS button. REDIAL button or
a SAVE button also protides handst’ree mode it’ Full One-Touch
Dialing is enabled.
Feature References
Operation References
-User Manual
Hold
Recall
No programming required.
Section 3, Features,
Full One-Touch Dialing
DPT Features,
Handsfree Operation
Description
Conditions
Programming
Prevents a call on hold from being kept waiting longer than a pre-
determined time. If the timer expires. ringing or an alarm tone is
generated as a reminder to the user who held the call. If the user is
on-hook and its speaker-phone is off, the phone is rung. If the user
is off-hook or in speakerphone mode when the timer expires an
alarm tone is sent from the built-in speaker of a proprietary
telephone (PT) or from the handset receiver of a single line
telephone at 15-second intervals.
.
.
.
Hold Recall can be disabled by programming.
The display F’T flashes the indication of the held party for five seconds
at 15second intervals synchronized with the tone.
Alarm tone is sent as follows:
References
Section 4, System Programming,
[200]
Hold Recall Time
Feature References
Section 3, Features,
Call Hold - CO Line
Call Hold - Intercom
Call Hold, Exclusive - CO Line
Call Hold, Exclusive - Intercom
Operation References
Not applicable.
3-72
Features
To Next Page
Loading...
