Features
D
Display, Extension Programmed Data
Description
Allows the display proprietary telephone user to confirm the
features assigned on the buttons on the telephone. When it is on-
hook (that is. when the handset is on the cradle
and the SP-PHONE
button is off). pressing a button displays the use of the button or the
information assigned to the button for five seconds.
Conditions
l
Display examples
( 1)
If REDIAL; SAVE: or One-Touch Dialing button is pressed.
the stored number is displayed below:
)
950-lOOlPP12345&
1
(2) If the DSS or MESSAGE button is pressed, the extension
number and the name (if assigned) stored under the DSS button
or the source of the Message Waiting is displayed:
123:
Tony
(3) If Account button is pressed. the display shows:
Account
1
(4)
If FWD/DND button is pressed, the selected feature assigned
on the button is shown as follows:
(a) If the Do Not Disturb feature is assigned:
.Do Not Disturb
(b) If Call Forwarding- All Calls to extension 123 is assigned:
1
FWD(All) Ext123
/
(c) If Call Forwarding - Busy to extension 234 is assigned:
FWD(BSY) Ext234
(d) If Call Forwarding - No Answer to extension 345 is
assigned:
1
FWD(NA) Ext345 1
(e) If Call Forwarding - Busy / No Answer to extension 100 is
assigned:
1
FWD(B/NA) ExtlOO
(f)
If Call Forwarding - To CO Line number 9 120143 1 is
assigned:
1
FWD(~O) 912014311
.
If the display characters exceed 16 digits, the mark “&” is shown at the
right-hand edge.
l
This is used to display the data programmed for each PF
(Programmable Feature), DSS, SAVE, or REDIAL button. If Full-One
Touch Dialing is enabled on the telephone Full-&e Touch Dialing will
be active instead.
Features
3-53
To Next Page
Loading...
