Panasonic KX-TD816 - Wall Mounting

2.2.3 Wall Mounting
-.
. . .
This set is exclusively made for wall mounting only. The wall
where the main unit is to be mounted must be able to support the
weight of the main unit. If screws other than the ones supplied are
used, use the same-sized diameter screws as the enclosed ones.
KX-TD816
Mounting on Wooden Wall
1. Place the templet (included) on the: wall
to mark the three screw positions.
____----
2. Install the three screws (included) into the
wall.
3. Hook the main unit on the scre&‘heads.
Mounting on Concrete or Mortar
Wall
1.
2.
Place the templet (included) on the wall
to mark the three screw positions.
Drill three holes and drive the anchor
plugs (included) with a hammer, flush to
the wall.
To the wall surface
Anchor Plua I
3. Install the three screws (included) into
the anchor plugs.
4. Hook the main unit on the screw heads.
.
.
c
i
-i
--
2-6
Installation