Panasonic KX-TD816 - Page 41

r
3
9.
2.2.3 Wall Mounting
KX-TD1232
Mounting on Wooden Wall
.
1. Place the templet (included) on the wall
2.
I
I l----l
~__---__ _-- + __,+
j Teiip-
Install the four screws (included) into the
Wd.
Mounting on Concrete or Mortar
Wall
1.
2.
3.
Place the templet (included) on the wall
to mark the four screw positions.
Drill four holes and drive the anchor
plugs (included) with a hammer, flush to
the wall.
ro the wall surface yi///concrete Wall
Install the four screws (included) into the
anchor plugs.
4. Hook the main unit on the screw heads.
-
Installation 2-7