B
3
Features
Feature References
Section 3, Features,
Buttons on Proprietary Telephones DSS Console (KX-T72-lO
/
KX-T7040)
Operation References
Not
applicable.
Button,
Group-CO (G-CO)
Description
Conditions
To
support
efficient utilization of CO lines, a group of CO lines
(CO line group) can be assigned to a CO button. The function is
referred to as Group-CO (G-CO). The G-CO button works in
conjunction with the DIL l:N feature. Any incoming call from any
CO line in the CO line group arrives at the G-CO button. To make
a CO call. the user can access an idle CO line in the group by
simply pressing the dedicated G-CO button.
No G-CO button is originally provided on a proprietary telephone (PT).
It is programmable on a CO button by either System or Station
Programming.
It is needed to program the extension for receiving and / or originating
calls on CO lines.
It is possible to assign the same CO line group to more than one G-CO
buttons on the same PT.
It is possible to assign the same line to an S-CO button and to a G-CO
button.
Immediate, delayed, no ringing or no incoming call (disable) can be
selected on an extension-CO line basis.
The digital PT user can choose a desired ringer frequency for each G-
CO button by System or Station Programming.
Programming References
Section 4, System Programming,
[005]
Flexible CO Button Assignment
[400] CO Line Connection Assignment
[401] CO Line Group Assignment
[603]-[604] DIL 1 :N Extension and Delayed Ringing - Day / Night
[605]-[606] Outgoing Permitted CO Line Assignment - Day / Night
Station Programming
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Manual,
Flexible Button Assignment - Group-CO (G-CO) Button
Ringing Tone Selection for CO Buttons
3-16
Features
To Next Page
Loading...
