Panasonic KX-TD816 - Line Access, CO Line Group

L
3 Features
CO button on ;I PT according to the priority:
S-CO > G-CO > L-CO on a hunted CO line yx~p
l If Idle Line Preference - Outgoinp is set on the telephone. the user can
access an idle line only by goiq off-hook.
l The system Lvaits for a progammed time before dialin? after a CO line
is seized.
Programming References
Section 4, System Programming,
[ 1001 Flexible Numbering. Automatic line access / ARS
[ 1031 Automatic Access CO Line Group Assignment
[2 1 l] Dial Start Time
[400] CO Line Connection Assignment
[605]-[606] Outgoing Permitted CO Line Assignment - Day / Night
Feature References
Section 3, Features,
CO Line Connection Assigment - Outgoing
Operation References
DPT Features, SLT Features;
-User Manual
Outward Dialing - Line Access. Automatic
Line Access, CO Line Group
Description
Allows the extension user to dial access a CO line group.
An idle
line is selected from the CO line group. To specify a CO
line
group, dial the feature number (the default setting is “8”)
and a
desired CO line group number (1 through 8). A proprietary
telephone user can also specify a CO line group by pressing a
Group-CO button.
Conditions
Each extension is subject to System Programming items for CO lines
available to access.
An idle line is selected in sequence from the lines in the specified CO
line group.
Group-CO buttons must be programmed prior to use.
If Idle Line Preference - Outgoing is set on the telephone, the user can
access an idle line only by going off-hook.
Programming References
Section 4, System Programming,
WI
[lOOI
[2111
[4W
Flexible CO Button Assignment
Flexible Numbering, CO line group line access
Dial Start Time
CO Line Connection Assignment
3-78
Features