000
42
l
Manager Programming
Date and Time Set
NOTICE
It is assumed that you have read Section 4.1 “General Programming Instructions.” The use of
the soft buttons is discussed in the section, therefore we will not make any reference to them in
the following instructions. At any time the soft buttons can be used in place of the overlay
keys.
Description
Selection
Sets the current date and time.
l
Year: 00 through 99
l
Month:
Jan. through Dec.
l
Day: 1 through 31
l
Dayoftheweek:SUN/MON/TUE/WED/THU/FRI/SAT f-
l
Hour:
1
through 12
J
l
Minute: 00 through 59
l
AM/PM
Default
l
KX-TD816 - ‘94 Jan. 1 SAT 12:OO AM
l
KX-TD1232 - ‘93 Jan. 1 FRI 12:00 AM
Programming
1.
Enter 000.
Display:
Day/Time Set
2.
Press
NEXT.
Display example: '93 Jan.
1 FRI
3.
Enter the year.
To change the current entry, press CLEAR and the new year.
4.‘ Press +.
5.
Keep pressing
SELECT until the desired
month is displayed.
6.
Press +.
7.
Enter the day.
To change the current entry, press CLEAR and the new day.
8.
Press *.
9.
Keep pressing SELECT until
the
desired day of
the week is
displayed.
4-14
System Programming
To Next Page
Loading...
