B
Features
The functions of the listed buttons are described below:
AUTO ANSWER / MUTE: This dual function button is used for
extension auto-answer and microphone mute during a
conversation.
AUTO DIAL / STORE: Used for System Speed Dialing and
storing program changes.
CO
(Central Office line):
Can be re-assigned to a different CO or
to various feature buttons.
CONF
(Conference):
Used to establish a three-party conference.
FLASH: Allows you to disconnect the current call and originate
another call without hanging up (Flash). Sends a flash signal to the
Central Office or a host PBX to access their features (External
Feature Access).
Function:
Used to perform the displayed function / operation.
FWD / DND (Call Forwarding / Do Not Disturb):
Used to
program Call Forwarding, set Do Not Disturb.
HOLD:
Used to place a call on hold.
INTERCOM:
Used to make or receive intercom calls.
MESSAGE:
Used to send a message or display current message.
MONITOR: Used for handsfree operation.
PAUSE:
Inserts a pause in a speed dial number. With an analog
proprietary telephone, it is used as the PROGRAM button.
PF (Programmable Feature):
This flexible button can be
programmed to be a One-Touch Dialing, FWD / DND, SAVE,
Account, CONF (Conference) or Voice Mail Transfer button, as
desired.
PROGRAM:
Used to enter / exit Programming mode.
REDIAL:
Used for Last Number or Automatic Redial.
SAVE:
Used to store a dialed telephone number for Saved Number
Redial.
SHIFT:
Used to access the second level of Soft button function.
Soft:
Pressing a Soft button performs the function / operation
appearing on the bottom line of the display.
SP-PHONE (Speakerphone):
Used for handsfree operation.
Pressing the button causes the telephone to switch between handset
and handsfree operation.
TRANSFER:
Transfers a call to another extension or external
destination.
VOLUME:
Used to adjust the ringer, speaker, handset and headset
volume and the display contrast.
3-20
Features
To Next Page
Loading...
