200
44
l
Timer Programming
Hold Recall Time
Description
Assigns the length of the hold recall timer. This timer is used to
alert an extension that a call has been held for an extended period
of time.
Selection
Time (seconds): 0
through 240
(O=Hold Recall disabled)
Default
60 s
Programming
1.
2.
3.
4.
5.
Enter 200.
Display:
Hold Recall Time
Press
NEXT.
Display example: Time: 60 set
Enter the
time.
To
change the current entry, press CLEAR and the new time.
Press
STORE.
Press
END.
Conditions
l
Select “0” if Hold Recall is not required.
l
You cannot leave the entry empty.
Feature References
Section
3,
Features,
Hold Recall
4-50
System Programming
To Next Page
Loading...
