44 .
Timer Programming
.205
lj’xtension-to-CO Line Call Duration Time
Description
Selection
Default
Programming
Sets the maximum time allowed for a conversation with an outside
party. If a
CO
call is originated or answered by a programmed
extension user and the timer expires, the call is disconnected.
Time (minutes):
1 through 64
10 mm
1.
2.
3.
4.
5.
Enter
205.
Display: CO Dur. Time
Conditions
Press
NEXT.
Display example: Time:10 min
Enter the time.
To
change the current entry, press CLEAR and the new time.
Press
STORE.
Press
END.
l
This
time-out applies to extensions to which Limited Call Duration is
assigned by program [502] “Extension-to-CO Line Call Duration
Limit.”
l
This time cannot be set to zero or be left empty.
Feature References
Section
3,
Features,
Limited Call Duration
System Programming
4-55
To Next Page
Loading...
