208
44
l
Timer Programming
Inter Digit Time
Description
Assigns the maximum time allowed between digits on an outgoing
toll call. If an extension user fails to dial any digits during this
time, the DTMF receiver is released. This timer applies until the
Toll Restriction check is completed.
Selection
Default
Programming
Time (seconds): 5
through 30
10 s
1.
2.
3.
4.
5.
Enter 208.
Display:
Inter Digit Time
Press
NEXT.
Display example: Time:10
set
Enter the
time.
To change the current entry, press
CLEAR and the new time.
Press
STORE.
Press
END.
I-
!
Conditions
l
This timer is used for toll restriction checking.
l
You cannot leave the entry empty.
Feature References
Section
3,
Features,
Toll Restriction
4-58
System Programming
To Next Page
Loading...
