331
45
0
TRS / ARS Programming
ARS ModiJj, Added Number
Description
Determines how the dialed number should be modified before
sending to the central offke. Digits are added to the beginning of
the dialed number.
Selection
l
Modification table number:
1 through 8
l
Number to be added: 20 digits (max.)
Default
All modification tables - Not stored
Programming
1.
2.
3.
4.
5.
6.
7. Repeat steps 4 through 6.
8. Press END.
Enter 331.
Display:
ARS Modify Add
Press NEXT.
Display: Modify Table?->
Enter a modification table number.
To
enter table number 1. you can also press NEXT.
Display example:l:
Enter the number to be added.
To
delete the current entry, press CLEAR.
To
change the current entry, press CLEAR and the new
number.
Press STORE.
To program another modification table, press NEXT or
PREV, or SELECT and the desired
modification table
number.
Conditions
l
There is a
maximum of eight Modification Tables,
each of which can be
given a number to be added.
l
Each number has a maximum
of 20 digits, consisting of 0 through 9,
* ,
#,
and PAUSE.
Feature References
Section
3,
Features,
Automatic Route Selection (MIS)
4-76
System Programming
To Next Page
Loading...
